This post has NOT been accepted by the mailing list yet.
<p>home because acidic, alkaline cleaning products can damage the brightness of the wood floor. Step 1: Installation of traditional geothermal heat is very important (not electric heating), the traditional geothermal refers to the plumbing, the maximum surface temperature does not exceed 28 ° C. Sudden changes in temperature affect the floor a lot, we should ensure that </p> <p>the temperature gradually increased for 4 weeks. Remember to not be solid wood flooring pavement to warm the cooling system. 2, select the real wood species is also very important, the best choice of oak flooring. Avoid the choice of beech, maple, Huai wood. 3, paving the floor before, we must first test the ground moisture content. Ground release of </p> <p>water vapor usually takes several months (depending on the circumstances, at least 4 months). We can use the hygrometer to measure the ground moisture content, installation workers can complete this work. Maximum water content can not exceed 2%. 4, the installation of solid wood flooring, geothermal system has been working at least 4 weeks. The temperature </p> <p>[url=http://aftdeck.com/wpcs/268.html]dubai pvc panel store[/url]<br /> [url=http://aftdeck.com/inexpensive/1096.html]balcony deck pavement material[/url]<br /> [url=http://aftdeck.com/low-cost/7768.html]where to buy cheap tongue and trough barn wall[/url]</p>